'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
FDM 3D printer filament promising improved toughness and consistent feeding. Makers and small workshops gain more reliable functional parts and smoother finishes for everyday projects. Is choosing ELEGOO PLA+ Filament the right step for fewer failed prints and easier handling?
⚡ At a Glance
- • Print Quality: Glossy surface finish with strong layer bonding and low warpage
- • Best for: Hobbyists and makers printing functional parts that need extra toughness
- • Not ideal for: Users who require non-1.75mm filament sizes
Enhanced PLA Plus formulation increases toughness and reduces shrinkage for functional prints. Precise 1.75mm diameter with tight tolerance and vacuum-sealed spools minimise feeding issues and moisture-related faults.
Stronger Functional Parts – thanks to higher toughness and impact strength
An improved PLA Plus formulation raises toughness and impact resistance while keeping warpage and shrinkage low, helping parts withstand mechanical stress. Enhanced inter-layer bonding reduces the likelihood of brittle failure under load.
Printed components like small brackets, clips and fixtures endure everyday use better, making functional prototypes and end-use parts more dependable.
Consistent Feeding – with precise 1.75mm diameter (±0.02mm)
Tight diameter tolerance ensures a uniform filament cross-section, which limits extrusion variation and helps maintain steady flow through most FDM extruders. Mechanical winding and manual inspection support consistent spool quality.
Fewer feeding hiccups and smoother extrusion reduce print failures and improve dimensional consistency on longer prints.
Cleaner Finish and Easier Layer Bonding – with glossy surface and lower printing temperature
Accurate deposition and formula-driven layer adhesion produce a glossier surface and reduce the chance of layer delamination, while the lower required printing temperature eases first-layer adhesion and reduces thermal stress.
Smoother part surfaces cut post-processing time and deliver better-looking prototypes straight off the printer.
✨ The 4 Key Reasons for ELEGOO PLA+ Filament
- Neatly Wound Spools — Cuts filament tangles, reducing failed prints and mid-print pauses
- Vacuum-Sealed Packaging — Keeps filament dry, lowering risk of bubbles or nozzle blockages
- 1.75mm ±0.02mm Tolerance — Ensures steady extrusion, improving layer consistency on long prints
- Two 1kg Cardboard Spools — Provides two spools, reducing spool changes during larger projects
📋 Technical Details at a Glance
- Material: PLA Plus
- Diameter: 1.75mm
- Tolerance: ±0.02mm
- Weight: 2KG total (2 x 1kg spools)
- Spool type: Cardboard spool
❓ Frequently Asked Questions
Q: Is this compatible with my 3D printer?
A: Compatible with most 1.75mm FDM 3D printers, thanks to the standard diameter and tight tolerance.
Q: Will the filament arrive ready to use?
A: Filaments are dried before packing and vacuum sealed to protect from moisture and dust, reducing the chance of bubbles or clogging.
Q: Does this filament reduce warping and printing issues?
A: Low warpage and shrinkage are specified, which helps reduce part deformation and improves first-layer reliability.
🏆 Our Verdict
Suitable for hobbyists, makers and small workshops that need tougher, more dependable PLA for functional prints. The combination of enhanced toughness, precise diameter tolerance and vacuum-sealed, neatly wound spools makes for consistently reliable printing. Good long-term value for frequent users thanks to fewer failed prints and reduced post-processing effort.
