'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
3D printer filament engineered for tougher, low‑warp prints and consistent feeding. Makers and small-scale manufacturers seeking reliable, glossy results will appreciate the neat winding and improved impact strength of ELEGOO PLA+ Filament. Will the spool reduce failed prints and produce functional parts you can trust?
⚡ At a Glance
- • Print Quality: Glossy surface with strong layer bonding and low warpage
- • Best for: Makers producing functional parts, prototypes and display pieces
- • Not ideal for: Users needing non‑1.75mm diameters or specialised flexible filaments
PLA Plus filament in 1.75mm diameter with dimensional accuracy of +/- 0.02mm. Vacuum-sealed and dried before packing to reduce moisture-related issues.
Stronger Functional Parts – Thanks to higher toughness and impact strength
Enhanced toughness and impact strength combined with low warpage and shrinkage improves dimensional stability during printing. Precise extrusion and strong layer bonding reduce delamination risk on practical parts.
More robust prints stand up to handling and light impact, making the filament suitable for functional prototypes and end-use parts.
Reliable Feeding with Reduced Tangles – With full mechanical winding and strict manual inspection
Full mechanical winding plus manual inspection ensures spools are neatly wound and checked for irregularities. That process reduces the chances of snap, line breakage and mid-print tangles.
Fewer print interruptions result in more consistent runs and less time spent untangling or restarting prints on most 1.75mm FDM printers.
Cleaner Extrusion and Fewer Clogs – Thanks to drying and vacuum-sealed packing
Filament is dried before packaging and vacuum sealed to protect from moisture and dust during storage and transit. Controlled packing reduces bubbles and contaminants that can cause nozzle blockages.
More consistent extrusion and less nozzle maintenance help reduce failed prints and wasted filament over repeated use.
✨ The 4 Key Reasons for ELEGOO PLA+ Filament
- Higher toughness - Produces durable parts that resist knocks and handling
- Dimensional accuracy +/-0.02mm - Ensures consistent, reliable layer registration
- Neatly wound spool - Reduces tangles and mid-print failures on most printers
- Vacuum-sealed, dried packaging - Minimises moisture-related bubbles and nozzle clogs
📋 Technical Details at a Glance
- Category: 3D printer filament (PLA Plus)
- Material: PLA Plus
- Diameter: 1.75mm
- Weight: 1kg (cardboard spool)
- Tolerance / Accuracy: +/- 0.02mm
❓ Frequently Asked Questions
Q: Is this filament compatible with my 1.75mm FDM printer?
A: Compatibility extends to most 1.75mm FDM 3D printers according to the product information, so standard extruders should accept the filament.
Q: Will the filament tangle on the spool?
A: Full mechanical winding and strict manual inspection are used to ensure neat spools, which reduces tangles, line breakage and snap during prints.
Q: Does the filament resist clogging and bubbles?
A: The filament is dried before packing and vacuum sealed to protect from moisture and dust, which helps prevent clogging and bubbling.
🏆 Our Verdict
The filament is well suited to makers and small manufacturers who need stronger, low‑warp prints and consistent feeding. A combination of improved toughness, tight diameter tolerance and careful spooling makes it especially useful for functional parts and reliable runs. Although initial cost is a consideration for some, the reduced failed prints and lower maintenance make it a sensible long-term choice.
