'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
Filament for FDM 3D printing designed to deliver a low-shine, frosted finish and more reliable extrusion. eSUN Matte PLA Filament helps makers produce display-ready models with less sanding for decorative or artistic work. Is the upgraded formulation worth switching to for regular print runs?
⚡ At a Glance
- • Surface Finish: Frosted, shine-free texture that reduces visible layer lines
- • Best for: Artists, hobbyists and makers creating decorative or display prints with a matte aesthetic
- • Not ideal for: Functional parts needing high heat resistance or a glossy surface finish
Upgraded Matte PLA improves extrusion consistency and bed adhesion and is supplied as four 1kg spools. Recommended extrusion temperature is 190–230°C with a bed temperature of 45–60°C.
Cleaner-looking prints – Thanks to Frosted Texture
Frosted surface finish diffuses light across layers, making layer lines less noticeable and giving a softer, less plastic appearance. The macaron shine-free colour complements the texture for decorative outputs.
Decorative pieces and display models require minimal post-processing; prints look more refined straight from the printer, reducing finishing time.
Fewer failed first layers – With Improved Adhesion and Extrusion
Upgraded formulation optimises extrusion output and bed adhesion, combined with a recommended nozzle temperature range of 190–230°C and bed temperature of 45–60°C to reduce warping.
More reliable first layers and reduced print failures make larger or delicate prints easier to complete successfully.
Reliable feeding and spool handling – Thanks to Neat Winding and Tight Diameter Tolerance
Perfect roundness and tighter diameter tolerance lower filament runout variance while neat winding prevents overlaps that can cause tangles or jams during long prints.
Long prints and multi-spool projects run with fewer interruptions, cutting down on wasted time and filament.
✨ The 4 Key Reasons for eSUN Matte PLA Filament
- Four 1kg Spools – Ideal for multi-part projects without frequent spool changes
- Wide Temperature Range – Compatible with many printer setups and easy tuning
- Low Shrinkage – Minimal warping keeps dimensional accuracy on larger prints
- High Toughness – Prints resist cracking and handle post-processing better over time
📋 Technical Details at a Glance
- Material: Upgraded Matte PLA
- Diameter: 1.75mm
- Weight per spool: 1kg
- Pack size: 4 spools
- Colour: Matte Deep Black
❓ Frequently Asked Questions
Q: Will this filament work with my FDM printer?
A: Compatibility is indicated with most FDM 3D printers, specifically naming Raise3D, Prusa, Voron, Creality 3D and Bambu Lab.
Q: What temperatures should I use for printing?
A: Recommended extrusion/nozzle temperature is 190–230°C and recommended bed temperature is 45–60°C.
Q: Do prints need much post-processing?
A: The frosted, shine-free finish and macaron colour are intended for decorative parts and often require minimal sanding or painting.
🏆 Our Verdict
Ideal for hobbyists, artists and small-scale makers who prioritise a matte, display-ready finish. The frosted texture, improved extrusion and consistent spool winding make decorative and multi-part projects straightforward to print. An economical choice for regular printing, offering dependable long-term value for frequent users.
