'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
3D printer filament designed for tougher, low-warp prints and reliable feeding for functional parts. ELEGOO PLA+ Filament gives makers peace of mind with stronger parts and consistent print quality. Is PLA+ the right step up from standard PLA for everyday projects?
⚡ At a Glance
- • Print Quality: Glossy surface finish, strong layer bonding, low warpage
- • Best for: Hobbyists and makers printing functional parts and consistent prototypes
- • Not ideal for: Use cases requiring flexible, high-temperature or specialty filaments
Enhanced toughness and impact strength suit functional parts and practical projects. Precise 1.75mm diameter with ±0.02mm tolerance and vacuum-sealed packaging support reliable, clog-free printing.
More durable, functional parts – thanks to higher toughness and impact strength
An improved PLA Plus formulation increases toughness and impact resistance, reducing the chance of fractures during use. Lower warpage and shrinkage help maintain part geometry during cooling.
Stronger parts tolerate handling and minor impacts, making them suitable for functional components and everyday use. Fewer failed prints occur when strength matters.
Reliable, tangle-free feeding – with full mechanical winding and strict inspection
Full mechanical winding combined with manual inspection ensures the coil is neatly wound and consistently tensioned. Neat spooling reduces the incidence of snaps and line breaks during long prints.
Longer prints run with fewer interruptions caused by tangles or feed problems, improving successful print rates. Less time is lost hunting for spool-related faults.
Consistent extrusion and smooth finish – with precise diameter control and low moisture
Manufacturing controls hold the 1.75mm diameter to an accuracy of ±0.02mm, promoting steady extrusion. Filament is dried before packing and vacuum sealed to prevent bubbles and moisture-related clogging.
Prints show a glossy surface and strong layer adhesion with minimal delamination, reducing post-processing work. Nozzle issues and voids become less frequent thanks to dry, stable filament.
✨ The 4 Key Reasons for ELEGOO PLA+ Filament
- Enhanced Toughness — Produces durable prints that withstand impact and stress
- ±0.02mm Diameter Accuracy — Ensures consistent extrusion and dimensional fidelity
- Neat Mechanical Winding — Reduces risk of tangles for long, uninterrupted prints
- Vacuum-Sealed & Dried — Minimises moisture, reducing bubbles and nozzle clogging
📋 Technical Details at a Glance
- Material: PLA Plus (PLA+)
- Diameter: 1.75mm
- Diameter Tolerance: ±0.02mm
- Weight: 1kg (cardboard spool, 2.2lbs)
- Spool Type: Cardboard spool
❓ Frequently Asked Questions
Q: Is it compatible with most 3D printers?
A: Compatible with most 1.75mm FDM 3D printers on the market.
Q: Will the filament tangle during long prints?
A: Full mechanical winding and manual inspection keep the spool neat, reducing tangles, snaps and line breaks.
Q: How is moisture managed to prevent clogging?
A: Filament is fully dried before packing and vacuum sealed to protect from moisture and dust, lowering the risk of bubbles and nozzle clogs.
🏆 Our Verdict
Ideal for hobbyists and makers who print functional parts and need dependable results. The combination of enhanced toughness, tight diameter control and neat winding makes it especially reliable for longer or practical prints. Although likely a step up from basic PLA in cost, fewer failed prints and stronger parts deliver clear long-term value.
