'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
FDM 3D printing filament promising improved toughness and consistent feeding, ideal for functional parts and prototypes. Confident printing with fewer tangles and smoother surfaces makes the process less frustrating. Is ELEGOO PLA+ Filament the right choice for regular makers and workshop use?
⚡ At a Glance
- • Print Quality: Glossy surface finish with strong layer bonding and low warpage
- • Best for: Functional parts and general FDM projects that need toughness and dimensional accuracy
- • Not ideal for: Printers that do not use 1.75mm filament or projects requiring non-PLA materials
PLA Plus filament delivers enhanced toughness and ±0.02mm diameter accuracy. Neatly wound 1kg cardboard spool is compatible with most 1.75mm FDM printers.
Durable, functional prints - with PLA Plus chemistry
PLA Plus formula increases toughness and impact resistance while reducing warpage and shrinkage during cooling. Material undergoes controlled production to retain mechanical properties suitable for load-bearing parts.
Printed components resist cracking and handle light mechanical stress, ideal for jigs, fixtures and functional prototypes.
Reliable feeding with fewer snags - with precise 1.75mm tolerance and neat winding
Manufacturing keeps filament diameter at 1.75mm with a tolerance of ±0.02mm, and mechanical winding plus manual inspection prevents loose coils. Consistent cross-section supports even extrusion.
Long prints run more smoothly with reduced risk of jams, tangles or mid-print stops, saving time and filament.
Cleaner surface finish and easy prints - with strong layer bonding and low printing temperature
Accurate deposition and strong inter-layer adhesion minimise layer delamination, and the material prints at relatively lower temperatures compared with some alternatives. Filament is fully dried and vacuum sealed to avoid moisture-related defects.
Parts come off the build plate with a glossy finish and fewer defects, cutting down post-processing and sanding.
✨ The 4 Key Reasons for ELEGOO PLA+ Filament
- Enhanced Toughness - Reduces part breakage for functional prototypes and fixtures
- Dimensional Accuracy +/-0.02mm - Maintains consistent diameter for predictable extrusion and part tolerances
- Neatly Wound Spool - Minimises tangles, reducing mid-print stops and filament waste
- Vacuum-Sealed Packaging - Preserves dryness, preventing bubbles and nozzle clogs during printing
📋 Technical Details at a Glance
- Material: PLA Plus
- Diameter: 1.75mm
- Weight: 1kg (cardboard spool)
- Spool Type: Cardboard spool
- Dimensional Accuracy: ±0.02mm
❓ Frequently Asked Questions
Q: Is this filament compatible with my 3D printer?
A: Compatibility covers most 1.75mm FDM 3D printers, so printers that accept 1.75mm filament should work without issue.
Q: Will the filament cause nozzle clogs or bubbles?
A: Filament is dried and vacuum sealed before packing to prevent moisture, and descriptions state no clogging and no bubbles when used correctly.
Q: Is the filament suitable for functional or load-bearing parts?
A: Enhanced toughness and increased impact strength make the filament suitable for functional parts and prototypes that need greater durability.
🏆 Our Verdict
Suitable for hobbyists, makers and small workshops that need tougher PLA for everyday functional prints. Enhanced toughness, tight diameter tolerance and neat winding combine to deliver reliable feeding and good surface finishes. Offers strong value through fewer failed prints and reduced post-processing, making it a sensible choice for regular use.
