'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
Automotive steering part that shields rack and pinion assemblies against dust and water, using flexible silicone construction and a complete clamp-and-tie kit. Peace of mind for DIY mechanics and workshop technicians who need a reliable, long-lasting repair. Will the Toolwiz Inner Tie Rod Boot Kit suit your steering rack and repair needs?
⚡ At a Glance
- • Sealing Performance: Waterproof and dustproof design reduces ingress and protects steering internals
- • Best for: DIY mechanics and garages replacing inner tie rod boots on cars, trucks and SUVs
- • Not ideal for: Applications with inner shaft or housing sizes outside 10–12 mm and 33–35 mm without modification
Silicone boots with a universal, cut-to-fit form factor shield rack and pinion from contaminants. The kit includes clamps and ties to secure the boot and complete the repair.
Long-term steering protection - Thanks to waterproof and dustproof design
Waterproof and dustproof construction seals the connection between the inner tie rod shaft and steering rack, preventing dirt and water from reaching the joint. A tight seal reduces abrasive particles and moisture that accelerate wear.
Extended component life and more reliable steering response, reducing the chance of premature rack or tie rod failure.
Secure, slip-resistant fit - With anti-wear silicone material
High-quality silicone increases friction against the rack housing and shaft while remaining flexible under load; the material resists wear, ageing, stains and extreme temperatures without deforming. Soft material also permits trimming to size for a closer fit.
A firm, stable fit that stays in place during steering, lowering the risk of the boot shifting or kinking under normal use.
Workshop-ready installation - Thanks to included clamps and cable ties
The kit supplies two small clamps, two large clamps and six wire ties sized to match the boot ends, allowing a mechanical lock to the shaft and housing. Installation requires wheel removal and outer tie rod disconnection, cleaning the shaft, sliding the boot over the rack and securing the ends.
A complete set of fasteners streamlines replacement so the repair can be finished without sourcing extra parts.
✨ The 4 Key Reasons for Toolwiz Inner Tie Rod Boot Kit
- Anti-wear Silicone - Resists heat and ageing for long service life
- Universal Cut-to-Fit - Trim to suit 10–12 mm shafts and most housings
- Complete Repair Kit - Includes clamps and ties for secure, workshop-ready installation
- Waterproof Seal - Keeps dust and water out to reduce wear
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Material: Silicone
- Length: 8.85" / 220 mm
- Small end ID: 0.39" / 10 mm
- Large end OD: 1.25" / 34 mm
❓ Frequently Asked Questions
Q: Will the boot fit my steering rack?
A: Compatibility covers inner tie rod shaft diameters of 10–12 mm and steering rack housing outer diameters of 33–35 mm, and the silicone can be trimmed to improve fit for similar sizes.
Q: What comes in the kit and is anything else needed?
A: The kit contains two boots, two small clamps, two large clamps and six wire ties; standard workshop tools for wheel removal and disconnecting the outer tie rod end are needed to complete the exchange.
Q: Is the material durable enough for harsh conditions?
A: Silicone construction resists wear, ageing, stains and extreme temperatures without deforming, giving stable performance in demanding environments.
🏆 Our Verdict
The Toolwiz Inner Tie Rod Boot Kit is suitable for DIY enthusiasts and workshop technicians who need a reliable repair for steering rack seals, especially on cars, trucks and SUVs with compatible dimensions. Durable silicone construction and a complete set of clamps and ties deliver effective waterproof and dustproof protection that extends steering component life. The kit represents practical long-term value by reducing the likelihood of costly steering repairs through improved sealing and easier installation.
