'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
An aftermarket suspension part designed to lower rear ride height and improve high-speed stability for CRF250L and CRF250 Rally models. Shorter riders enjoy more confidence at junctions while touring riders feel more planted on long road sections with Janice CRF250L Lowering Link. Would that modification suit your riding style and ground-clearance needs?
⚡ At a Glance
- • Ride Height Change: Lowers rear ride height by around 50 to 100mm compared with the standard position
- • Best for: Shorter riders, touring riders and anyone wanting improved high-speed stability on CRF250L/Rally bikes
- • Not ideal for: Riders who require full stock ground clearance or extreme off-road clearance
A CNC-machined rear suspension linkage made from 7075-T6 aviation-grade aluminium for CRF250L and CRF250 Rally models. Lowers rear ride height by approximately 50 to 100mm while offering an oxidised finish and straightforward bolt-on installation.
More Confidence at Stops and Corners – thanks to a lower rear ride height
An adjustable rear link alters suspension geometry to position the seat and rear axle roughly 50 to 100mm lower than standard. The altered geometry reduces lean and makes flat-footing easier at low speeds.
Shorter riders can plant a foot more easily at junctions, while all riders gain a steadier feel when leaning into faster corners. Stability on open roads feels noticeably improved without complicated setup changes.
Strong, Lightweight Construction – with 7075-T6 aviation-grade aluminium
Manufactured from 7075-T6 aluminium, a high-strength alloy used in aerospace applications, then precision CNC-machined for tight tolerances. The material choice keeps mass low while resisting bending under load.
Durable linkage stays rigid under aggressive riding, helping maintain consistent suspension behaviour. Corrosion-resistant properties extend usable life in wet UK conditions when combined with the oxidised finish.
Simple DIY Fitment – thanks to bolt-on design and no special tools
Designed for direct fitment to CRF250L and Rally linkage points without the need for specialised tools or complex instructions. Mounting hardware aligns with factory pivot locations for straightforward replacement.
Many owners can complete the swap at home or in a local garage, avoiding lengthy workshop waits. Quick installation makes the upgrade accessible for riders who prefer weekend maintenance.
✨ The 4 Key Reasons for Janice CRF250L Lowering Link
- Precision CNC finish - Ensures exact alignment for predictable rear suspension behaviour
- Oxidised coating - Resists corrosion and maintains appearance in wet conditions
- Choice of colours - Match or personalise the bike with black, red, blue or silver
- Wide model compatibility - Fits CRF250L and CRF250 Rally variants across listed years
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Part type: Rear lowering linkage / suspension link
- Compatible models: CRF250L (2013–2020), CRF250 L RALLY 2020, CRF250RA RALLY 2017–2018
- Material: 7075-T6 aviation-grade aluminium
- Ride height change: Approximately 50 to 100mm lower than standard position
❓ Frequently Asked Questions
Q: Will this fit my CRF250L or Rally model?
A: Compatibility is specified for CRF250L models from 2013 to 2020 and for CRF250 Rally variants including CRF250 L RALLY 2020 and CRF250RA RALLY 2017–2018.
Q: How much does the rear ride height change?
A: The link lowers rear ride height by around 50 to 100mm from the standard position, helping shorten effective seat height and altering handling geometry.
Q: Is it difficult to install at home?
A: Installation is designed to be straightforward, with a bolt-on fitment that does not require special tools or complicated instructions.
🏆 Our Verdict
Suitable for CRF250L and Rally owners who want a lower seat height and more planted road manners, especially shorter and touring riders. CNC-machined 7075-T6 aluminium construction and an adjustable rear link deliver durable lowering and corrosion resistance. As an aftermarket upgrade, the combination of robust materials and simple fitment gives sensible long-term value for riders prioritising confidence and fitment.
