'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
Home-improvement solder designed for small electronics repairs, promising controlled melting and dependable joints. Repairers gain reassurance when fixing phones, remotes and circuit boards with tidy results. Is Sumwitum Solder Wire the right choice for hobbyists and quick household fixes?
⚡ At a Glance
- • Melting Range: 185°C - 190°C melting point with 2% rosin-core flux
- • Best for: Electronics hobbyists and household repairers working on phones, remotes and small circuit boards
- • Not ideal for: Plumbing, heavy metalwork or large-scale brazing tasks
Lead-free alloy with rosin-core flux for electronic soldering. Small-diameter wire supports neat joints on compact components.
Precise Repairs on Small Boards - with 0.8mm diameter and rosin core
A 0.032-inch (0.8mm) wire size enables focused solder deposition and reduced excess flow. The rosin-core flux (2% content) promotes wetting and helps solder flow into pads and component leads.
Accurate placement reduces bridged joints and rework, making fine SMD and through-hole repairs easier. Small drops of solder are simpler to control for neat, repeatable results.
Clear, Consistent Melting Behaviour - thanks to Sn99.3 Cu0.7 lead-free alloy
The Sn99.3 Cu0.7 composition produces a melting range around 185°C to 190°C, which gives predictable flow when the iron reaches working temperature. The alloy composition is selected for electrical and thermal conductivity suitable for electronic connections.
Predictable melting reduces overheated pads and thermal stress on components, helping preserve fragile boards. Lead-free chemistry suits domestic electronic repair priorities where lead avoidance matters.
Portable Pack for On-the-Spot Fixes - with small pack design
Compact packaging keeps a short length of wire ready to carry, and the small net weight supports pocket storage. The roll format allows easy feeding of short solder lengths during a repair.
Quick fixes around the house become less fiddly since a small amount of solder is available without unpacking a full spool. Handy for emergency repairs away from the main workshop.
✨ The 4 Key Reasons for Sumwitum Solder Wire
- Lead-free alloy - Reduces toxic residue for safer electronics handling and repair
- 0.8mm diameter - Enables precise joints on small SMD parts and fine traces
- Pocket-sized pack - Convenient to carry for spontaneous repairs around the house
- Reliable solderability - Consistent melting and smooth flow for fewer reworks
📋 Technical Details at a Glance
- Category: Solder Wire for Electronic Repairs
- Composition: Sn99.3 Cu0.7 (lead-free)
- Diameter: 0.032 inch (0.8mm)
- Flux content: 2% rosin-core
- Melting point: 185°C - 190°C (365°F - 374°F)
❓ Frequently Asked Questions
Q: Is the solder wire lead-free?
A: Yes, the solder composition is lead-free, specified as Sn99.3 Cu0.7 with a rosin core.
Q: What melting temperature should be expected?
A: Expect a melting range around 185°C to 190°C, suitable for common electronics soldering irons.
Q: What kinds of repairs is the wire suitable for?
A: Suitable for household electronics repairs including phones, headsets, remotes, radios, TVs, toys and printed circuit boards.
🏆 Our Verdict
The Sumwitum Solder Wire suits electronics hobbyists and household repairers who need neat, reliable joints on small components. Lead-free Sn99.3 Cu0.7 alloy with a rosin-core and a 0.8mm diameter supports predictable melting and precise soldering. While individual budgets vary, consistent performance and portable packing deliver practical long-term value for frequent or occasional repairs.
