'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
Flat ribbon cable for data transmission and expansion interfaces across PCs and electronic equipment, the sourcing map Flat Ribbon Cable brings a tidy, multi-conductor route for board-level wiring. Hobbyists and repair technicians gain neat terminations and easier routing during prototyping and repairs. Will the 6-pin, 1.27mm pitch, 3 m length match the connectors and reach required?
⚡ At a Glance
- • Connection Quality: Suitable for data transmission across PCs and digital instruments; separates easily for clean terminations
- • Best for: Extending motherboard headers, JTAG/ISP links, LED displays and other board-level expansion tasks
- • Not ideal for: Setups requiring a different pin count, pitch or length than the supplied 6-pin, 1.27mm, 3 m cable
Flat ribbon cable with 6 pins at 1.27mm pitch and 28AWG conductors, supplied in a 3 m length. Total width is 7mm and the ribbon separates for tidy terminations with standard connectors and pins.
Extend Board Connections Reliably – With 6-pin, 1.27mm pitch wiring
Six conductors are arranged at a standard 1.27mm pitch, matching common IDC headers for JTAG and ISP use. The 28AWG conductors provide typical signal-carrying capacity for board-level interfaces.
Easily link expansion headers or programming ports over a 3 m span while keeping pin alignment correct for standard connectors.
Save Space in Tight Builds – Thanks to the flat ribbon form
Flat construction spreads conductors side-by-side into a slim profile, giving a total width of 7mm for the 6-pin cable. The ribbon format reduces cable bulk compared with bundled round cables.
Route multiple conductors through narrow chassis openings and keep wiring neat behind motherboards or inside enclosures.
Simplify Termination and Wiring – With readily separable conductors
Conductor ribbon separates easily for clean terminations and accepts standard wire connectors and pins. The cable ships as a single 3 m length, ready for cutting or partial separation as required.
Prepare clean solder or connector terminations quickly during prototyping, repairs or custom harness work without complex re-wiring.
✨ The 4 Key Reasons for sourcing map Flat Ribbon Cable
- 3 m length – Extends connections across larger cases or test benches reliably
- 1.27mm pitch – Matches common IDC headers for JTAG and ISP connections precisely
- 28AWG conductors – Slim wires reduce bulk while still supporting typical signal lines
- 7mm total width – Fits narrow connector bays and keeps wiring neatly routed
📋 Technical Details at a Glance
- Category: BISS
- Brand: sourcing map
- Pin Number: 6
- Pin Pitch: 1.27mm
- Wire Gauge: 28AWG
❓ Frequently Asked Questions
Q: What pin count and pitch does the cable use?
A: The cable has 6 pins with a 1.27mm pitch, suitable for common IDC header connections.
Q: Can the cable be used to extend motherboard or expansion headers?
A: Yes, the ribbon cable is described for connecting to computer motherboards and providing additional video or interface connections for expansion devices.
Q: Can the conductors be separated for terminating individually?
A: Yes, the conductor ribbon separates easily for clean terminations using standard wire connectors and pins.
🏆 Our Verdict
The cable suits hobbyists, repair technicians and anyone needing tidy, long-reach board-level connections. A standard 6-pin, 1.27mm pitch ribbon with 28AWG conductors and a 3 m length makes it particularly useful for JTAG/ISP linking and expansion interfaces. Cost-conscious users will find practical long-term value through straightforward compatibility and simple, reliable construction.
