'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
3D printing resin engineered for faster layer cure and improved print durability. Hobbyists and small workshops can finish more models with fewer failed prints. Is ANYCUBIC High Speed Resin the right choice for faster, reliable resin printing?
⚡ At a Glance
- • Curing Speed: Optimised for rapid layer reflow with high liquidity for consistent cures
- • Best for: Users printing fine-detail miniatures, rapid prototypes and small-batch production
- • Not ideal for: Environments requiring completely odour-free or medically certified resins
Low-viscosity, high-activity formula reduces cure time and supports finer detail. Improved resilience and lower shrinkage reduce failures and produce smoother surfaces.
Quicker Prints – Thanks to low-viscosity, high-activity formula
Viscosity has been reduced by around 50% compared with regular resin, allowing the liquid to flow rapidly during platform movements and carry away heat. Measured layer time on the Anycubic Photon Mono M7 Pro is 2.11 seconds at 0.1mm, with a maximum printing speed up to 170mm/h.
Much faster layer cures translate to shorter print jobs and higher throughput for repeat runs, without sacrificing layer adhesion.
Fewer Failures and Stronger Parts – With increased resilience in the resin
Formula upgrades raise resilience from 7.5% to 20%, improving the cured material's ability to withstand stress during printing and post-processing. Higher resilience lowers the chance of cracks or breakage under typical handling.
Better print yields and less waste, so fragile supports and thin features survive printing and cleaning more reliably.
Fine Detail and Smooth Finish – With high liquidity and low shrinkage
High liquidity enables rapid filling of tiny cavities and fine textures while reduced volume shrinkage during curing keeps dimensions closer to intended values. The combination supports precise feature reproduction and a smoother surface without excessive distortion.
Ideal for detailed miniatures, jewellery prototypes and textured models where crisp edges and minimal surface artefacts matter.
✨ The 4 Key Reasons for ANYCUBIC High Speed Resin
- 50% lower viscosity – Enables faster flow for quicker layer reflow and reduced hotspots
- 2.11s layer time at 0.1mm – Prints single layers around 21.56% quicker than standard resin
- Resilience increased to 20% – Cuts the likelihood of print failures and post-print damage
- Low odour formula – More tolerable printing environment for longer sessions
📋 Technical Details at a Glance
- Category: High-activity, low-viscosity 3D printing resin
- Compatibility: Demonstrated with Anycubic Photon Mono M7 Pro
- Viscosity reduction: Approximately 50% lower than regular resin
- Activity level: High-activity formula for faster curing
- Layer time (example): 2.11s per layer at 0.1mm (Photon Mono M7 Pro)
❓ Frequently Asked Questions
Q: Is this resin compatible with the Anycubic Photon Mono M7 Pro?
A: Yes. Tests show a layer time of 2.11 seconds at 0.1mm when used with the Photon Mono M7 Pro and the resin is presented as suitable for that machine.
Q: Will the resin reduce print failures?
A: Yes. Formula improvements raise resilience from 7.5% to 20%, which reduces the likelihood of failures and damage during printing and handling.
Q: Does the resin produce strong smells during printing?
A: Odour is reduced compared with previous high speed resin formulations, offering a more tolerable printing environment, though not marketed as completely odour-free.
🏆 Our Verdict
The product is well suited to hobbyists, designers and small workshops that need faster turnaround on fine-detail prints. Low-viscosity, high-activity chemistry combined with higher resilience makes it especially useful for miniatures and rapid prototypes. Improved yields and quicker prints point to strong long-term value for frequent resin printers.
