Parnells Haybob Rake Turner Wheel Review: Turf-friendly 3.50-8 replacement

Few things are as frustrating as replacing a worn garden wheel only to find it chews the lawn when you turn. The new Parnells Haybob Rake Turner Wheel arrives with a 3.50-8 Wanda tyre mounted on a heavy steel rim with a 25mm centre, letting owners swap worn assemblies quickly and keep turf intact.

⚡ At a Glance

• Traction: Wanda H8023 off-road tyre that balances grip and gentle contact with turf
• Optimised for: Ride-on mowers, garden tractors and small ATVs needing ready-mounted replacement wheels
• Harder for: Owners with axles larger than 25mm; the 25mm centre will not fit and the wheel will wobble or fail to mount securely

Supplied as two 3.50-8 tyre-and-tube assemblies on steel rims with a 25mm centre bore. Bearings are 6205RS rubber-sealed units and the shoulder profile is rounded to limit turf damage.

Refining hay turning with Wanda H8023 rounded-shoulder tyres

The Wanda H8023 off-road compound uses a rounded shoulder profile that keeps contact pressure lower at the tyre edge, which preserves turf when cornering. On soft ground, the tread still grips well enough to prevent slippage while keeping wheel marks minimal.

Reduced turf scuffing delivers neater rows and less cleanup after raking, a real benefit for lawns and sportsfields; a trade-off is that the narrower 3.50 section moves less soil than wider agricultural tyres, so very heavy loads will settle the ground more than a wider tyre would.

Why the 25mm centre is a standout attribute

A heavy steel rim houses two 6205RS ball bearings that give a sealed, low-friction spindle interface and are sized for a 25mm shaft. By keeping rotation smooth, the assembly lowers strain on the turning mechanism and reduces the chance of premature wear in the hub.

If your axle is a matching 25mm, the snug bore and sealed bearings eliminate wobble and extend service intervals; if your axle is larger or uses a different mount pattern, an alternative hub or adaptor will be required.

✨ The Standout Features of Parnells Haybob Rake Turner Wheel

6205RS rubber-sealed bearings – Ensure smooth rotation and resist contamination for longer life
Steel rim construction – Withstands knocks and frequent reuse without deforming
Tyre and tube fitted on rim – Ready-to-fit assemblies reduce downtime during replacements
Rounded shoulder profile – Minimises turf gouging when cornering at low speeds

📋 Technical Details at a Glance

Wheel size: 3.50-8
Tube size: 3.50-8
Tyre model: Wanda H8023
Tyre type: Off-road tread
Shoulder profile: Rounded shoulders

❓ Frequently Asked Questions

Q: Does the wheel come mounted and ready to fit?

A: Tyre and tube arrive fitted on the rim, so assemblies are ready for installation; Pro-tip: verify valve stem access and check tyre pressure before final mounting to avoid removal for adjustments.

Q: Are the bearings protected against dirt and moisture?

A: Bearings are 6205RS units with rubber seals that exclude grit and water; Pro-tip: after heavy use in mud keep the hub area clean and inspect seals for nicks to maintain longevity.

Q: What axle diameter is required to mount these wheels?

A: The centre bore is 25mm and the bearings suit a 25mm shaft, so an exact match is necessary for secure mounting; Pro-tip: measure the axle before ordering as adaptors are needed for non-standard diameters.

🏆 Our Verdict

Suitable for gardeners and smallholding owners who need quick, turf-friendly replacements for 3.50-8 wheels. The steel rim feels solid and gives a dull, confidence-inspiring thud when tapped while the tyre's rounded shoulder makes turns noticeably cleaner on close-cut grass. Given the durable bearings and ready-mounted fitment, the assembly represents a practical long-term replacement for machines used regularly around lawns and paddocks.