'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
A gas hose for caravans and motorhomes promises an extra layer of protection against hose failure. Owners can feel reassured while travelling or staying on pitch, because the built-in rupture protection valve in HAMILTON GAS PRODUCTS Rupture Protection Gas Hose activates if a break or damaged connection occurs. Is that level of safety necessary for everyday leisure use?
⚡ At a Glance
- • Safety Features: Built-in rupture protection valve activates in case of hose break or damaged end connection
- • Best for: Caravan, camping and motorhome owners using portable propane or butane gas
- • Not ideal for: Permanent domestic gas mains or industrial gas installations
Designed for leisure vehicle gas supply, the hose is 45cm long with crimped-on brass fittings. Conforms to EN16436-1 and uses Butane Nut x W20 Nut/Tail fittings for common connections.
Reduced risk of uncontrolled gas release – thanks to built-in rupture protection valve
A valve integrated into the hose is designed to activate if a hose break or damaged end connection occurs, interrupting gas flow to limit escape. Activation reduces the likelihood of sustained leakage that could lead to fire or explosion.
Offers an extra safety layer during failures, giving owners time to isolate supply and address the issue safely.
Fast installation on leisure systems – with crimped-on brass fittings and advisory label
Crimped-on brass fittings are supplied pre-attached and an advisory label gives connection guidance, allowing direct integration into existing caravan and motorhome gas systems. No separate fitting components are required for standard connections.
Fitters and owners can install quickly without hunting for matching parts, reducing installation time and potential errors.
Works with common cylinder types and connections – with Butane Nut x W20 Nut/Tail fittings
Fittings are specified as Butane Nut x W20 Nut/Tail, a configuration suitable for both butane and propane setups used in leisure environments. The hose is explicitly stated as compatible with both fuel types.
Makes swapping between campsite cylinders or stored gas simpler, avoiding the need for adaptors in most leisure setups.
✨ The 4 Key Reasons for HAMILTON GAS PRODUCTS Rupture Protection Gas Hose
- Crimped brass fittings – Immediate installation with crimped brass fittings and advisory label
- Butane x W20 fittings – Compatible with both butane and propane cylinders commonly used outdoors
- 45cm hose length – Provides convenient reach for most caravan and motorhome setups
- EN16436-1 compliance – Meets current safety standards for leisure gas hose installations
📋 Technical Details at a Glance
- Category: Gas hose for caravans and motorhomes
- Brand: HAMILTON GAS PRODUCTS LTD
- Length: 45cm
- Rupture Protection Valve: Built-in, activates on hose break or damaged connection
- Compliance: EN16436-1
❓ Frequently Asked Questions
Q: Is this hose suitable for caravan and motorhome gas systems?
A: Yes. The description specifies use in caravan, camping and motorhome installations and notes the 45cm length suits most standard setups.
Q: Will it work with both butane and propane cylinders?
A: Yes. Fittings are Butane Nut x W20 Nut/Tail and the hose is stated as suitable for both propane and butane gas.
Q: Does the hose come ready fitted or are extra fittings required?
A: Crimped-on brass fittings and an advisory label are supplied, allowing direct integration without sourcing additional fittings.
🏆 Our Verdict
Suitable for caravan, camping and motorhome owners who prioritise extra safety and straightforward installation. The built-in rupture protection valve combined with EN16436-1 compliance and pre-crimped brass fittings makes it a practical upgrade for leisure gas systems. While upfront cost will vary, the added protection and regulatory compliance support long-term peace of mind for leisure vehicle owners.
