'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
Automotive replacement parts for small bikes, supplying a full set of top-end gaskets needed for engine overhaul. Have a look at PetrolScooter Pit Dirt Bike Gasket Set for a ready collection that covers piston and ring work. Will the kit match a specific 125cc bore and your repair requirements?
⚡ At a Glance
- • Sealing Integrity: All necessary gaskets included to restore sealing at head, base and exhaust junctions
- • Best for: Home mechanics and small workshop technicians performing top-end rebuilds on pit bikes
- • Not ideal for: Engines with non-standard bore sizes or customised cylinder heads without matching gaskets
Complete top-end gasket set supplied to enable piston set or ring change. Includes an exhaust gasket and specifies a 52.4mm head base round oil hole, so measurement of bore size is essential.
Fast top-end rebuilds – with a complete gasket set for piston and ring changes
Contains all gaskets required to enable a piston set or ring change, with parts aimed at head, base and exhaust sealing. Exhaust gasket included to address a common leak point during cylinder work.
Mechanics and keen home technicians can complete a top-end overhaul without sourcing multiple individual seals, reducing parts delays and simplifying the job.
Accurate fit for 52.4mm bores – thanks to the specified head base dimension
Head base is described as 52.4mm with a round oil hole, which determines which gaskets will sit correctly against the cylinder and crankcase mating faces. Some 125cc engines use a 54mm set, so checking bore diameter before fitting is advised.
Matching gasket dimensions to the cylinder bore reduces the risk of oil or combustion leaks and helps ensure a reliable seal after reassembly.
Restored exhaust sealing – with an included exhaust gasket
Exhaust gasket is part of the kit to seal the manifold-to-cylinder joint, addressing a frequent source of fumes and noise following cylinder work. A correctly sized exhaust gasket protects flange faces and compensates for small surface imperfections.
Including the exhaust gasket means one less item to source during a top-end repair, helping to restore exhaust integrity as part of the same service.
✨ The 4 Key Reasons for PetrolScooter Pit Dirt Bike Gasket Set
- Complete top-end gasket kit - Enables full piston or ring overhaul without missing seals
- Exhaust gasket included - Ensures proper exhaust sealing when replacing cylinder parts
- Suitable for 110cc and 125cc - Compatible with common small-capacity pit bike engines
- 52.4mm head base specification - Matches 52.4mm bores, check for 54mm variant compatibility
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Brand: PetrolScooter
- Product type: Pit Dirt Bike Gasket Set
- Compatible engine sizes: 110cc, 125cc (check bore before fitting)
- Head base bore: 52.4mm head base round oil hole
❓ Frequently Asked Questions
Q: What does the kit include?
A: Includes all gaskets necessary to enable a piston set or ring change, and an exhaust gasket is supplied as part of the set.
Q: Will this fit my 125cc engine?
A: Fits 125cc engines with a 52.4mm head base bore; some 125cc engines have a 54mm set, so measure the cylinder bore before fitting.
Q: Are all head gaskets always required to be changed?
A: Some of the cylinder head gaskets listed may not need to be changed, depending on condition; inspect gaskets before deciding which ones to replace.
🏆 Our Verdict
The PetrolScooter Pit Dirt Bike Gasket Set is suitable for home mechanics and small workshops tackling top-end rebuilds on 110cc and compatible 125cc pit bikes. The kit's breadth, including an exhaust gasket and a 52.4mm head-base specification, reduces the need to hunt for missing seals. While buyers should verify bore size before purchase, the comprehensive coverage delivers practical long-term value for routine top-end maintenance.
