Best Deals Right Now
aws logo
£15.99

SEBSON PIR Motion Detector Review: Reliable outdoor motion sensing for wired lighting

SEBSON PIR Sensor Outdoor IP65, Surface Wall mounted, Infrared Motion Sensor, LED suitable, Range max. 12m/180° + 3m/360°, swivelling, max. 1200/600W, anthracite
SEBSON PIR Sensor Outdoor IP65, Surface Wall mounted, Infrared Motion Sensor, LED suitable, Range max. 12m/180° + 3m/360°, swivelling, max. 1200/600W, anthracite
4.8
[Weatherproof Design]  IP65-rated housing for reliable outdoor use and surface wall mounting.
[Dual Infrared Sensors]  Two IR sensors detect movement front, back, and beneath for full coverage.
[Extensive Detection Range]  Up to 12m/180° range; 3m with 360° close-range coverage.
[Adjustable Timer and Sensitivity]  Sensitivity 3-2000 LUX; timer adjustable from 10 seconds to 7 minutes.
[High Load Capacity]  Supports 1200W incandescent or 600W LED lamps; 3-wire installation compatible.
Best Deals Right Now
Buy on
aws logo
£15.99
Buy
Free shipping (24 - 48 hrs)

Outdoor motion detector designed to trigger and control external lighting reliably. Add reassurance arriving home at night with swift, predictable activation from the sensors and clear installation instructions using SEBSON PIR Motion Detector. Is hardwired operation and the specified load capacity the right fit for your setup?

⚡ At a Glance
  • Detection Range: 12m at 180° for long-range detection, plus 3m at 360° for close coverage using dual infrared sensors
  • Best for: Outdoor wall-mounted lighting for homes, driveways and small commercial entrances
  • Not ideal for: Installations that require built-in smart-home connectivity or wireless control

Dual infrared sensors expand coverage to reduce blind spots. Surface wall mounting and a compact footprint suit most outdoor lighting installations.


Reliable wide-area detection – Thanks to dual infrared sensors

Two IR sensors monitor movement in front, behind and beneath the unit, combining long-range 12m/180° detection with a separate 3m/360° close-range field. Vertical swivel adjustment of up to 180° helps direct detection where needed.

Consistent triggering across porches and pathways reduces missed activations and false blind spots, so external lights respond where people actually pass.

Weatherproof for outdoor use – With IP65-rated construction

IP65 classification indicates protection against dust and low-pressure water jets, making the unit suitable for exposed exterior locations. Compact dimensions and surface wall mounting simplify placement under eaves or on facades.

Durable operation through rain and wind keeps lighting dependable across seasons, reducing the need for frequent replacements.

Flexible timing and light control – With adjustable delay and sensitivity

Switch-on sensitivity can be set within a 3–2,000 LUX range and the duty cycle is adjustable from 10 seconds up to 7 minutes. The 3-wire connection supports standard wired lighting circuits.

Fine-tune when lights activate and for how long, saving energy and avoiding unnecessary night-time switching while matching typical household routines.

✨ The 4 Key Reasons for SEBSON PIR Motion Detector
  1. High Load Capacity — Handles up to 1200W incandescent and 600W LED loads reliably.
  2. IP65 Weatherproofing — Withstands heavy rain and outdoor conditions without failure.
  3. Adjustable Time & Light Sensitivity — Set delay from 10s to 7 minutes and 3–2000 LUX activation.
  4. Clear Multilingual Instructions — Speeds installation with straightforward guidance for most installers.
📋 Technical Details at a Glance
  • Category: Outdoor motion detector
  • Mounting: Surface wall mounting
  • Sensors: Two infrared (dual IR) sensors
  • Detection Range: 12 m (long-range)
  • Detection Range (close): 3 m (close-range)
❓ Frequently Asked Questions

Q: Is the unit suitable for outdoor use?

A: Yes, IP65 protection means the unit resists dust and water jets, making it suitable for exposed exterior locations.

Q: Can the sensor control LED lamps?

A: Yes, the maximum load for LED or other energy-saving lamps is 600W; incandescent load capacity is 1200W.

Q: What adjustments can be made after installation?

A: Detection angle can be altered with a vertical swivel up to 180°, time delay is adjustable between 10 seconds and 7 minutes, and light sensitivity can be set from 3 to 2,000 LUX.

🏆 Our Verdict

Well suited for homeowners and installers who want a straightforward, wired outdoor motion detector for lighting control. Dual infrared sensors, adjustable timing and an IP65 rating combine for dependable operation in typical exterior locations. Costs vary, but robust build quality and clear installation guidance suggest useful long-term value.