'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
Automotive auxiliary indicator for clear, ECE-approved side and mirror signalling, the Hella Auxiliary Indicator suits compact mirror housings and narrow panel gaps. Three yellow LEDs create a confident flashing signal that helps drivers feel seen. Is the glued mounting and open-ended wiring the right solution for your vehicle?
⚡ At a Glance
- • Light Output: Three yellow LEDs behind a crystal clear lens, optimised for lateral visibility
- • Best for: Owners fitting side or exterior mirror indicators who need road-legal approval
- • Not ideal for: Installations that require built-in multi-function lights or factory wiring plugs
Compact LED indicator with ECE approval and a single flashing function. Supplied with glued mounting, 800 mm cable and open cable ends for direct wiring.
Visible Side Signalling – Thanks to 3 yellow LEDs
Three yellow LEDs sit behind a crystal clear lens and operate as a single flashing light function approved under ECE rules. The LEDs concentrate output laterally for side visibility.
Noticeable, unambiguous signalling during lane changes and side indications, helping other road users spot intentions quickly.
Neat Installation in Tight Spaces – With glued mounting and compact dimensions
Glued mounting and compact housing dimensions (57mm x 24mm x 23mm) allow fitting into mirror housings or narrow side panels. Lateral installation is specifically supported.
Clean, low-profile fitment that sits flush in mirror casings or on vehicle flanks, preserving the vehicle’s appearance.
Straightforward Wiring – With 800 mm open cable ends
An 800 mm cable with open ends is supplied for direct connection to the vehicle’s electrical system, avoiding proprietary plugs. Open ends allow choice of connector method during installation.
Flexible routing to reach nearby connection points without needing immediate extensions, making aftermarket wiring simpler for installers.
✨ The 4 Key Reasons for Hella Auxiliary Indicator
- ECE approval - Confirms legal compliance for external side and mirror signalling
- Crystal clear lens - Enhances LED visibility without diffusing the flashing signal
- Compact dimensions - Fits tight mirror housings and narrow side panel gaps
- 800 mm cable with open ends - Simplifies routing and direct wiring to vehicle circuits
📋 Technical Details at a Glance
- Category: Automotive Parts and Accessories
- Lamp Type: LED
- Number of LEDs: 3
- Light Function: Flashing indicator (single function)
- Voltage: 12V
❓ Frequently Asked Questions
Q: Is the indicator road legal?
A: Yes, ECE approval is stated, confirming suitability for road use in jurisdictions recognising that approval.
Q: Can it be fitted to exterior mirrors?
A: Yes, the indicator is suitable for side installation and can be installed in exterior mirror housings.
Q: How is the unit wired into a vehicle?
A: An 800 mm cable with open ends is supplied for direct connection to the vehicle electrical system, allowing flexible wiring choices.
🏆 Our Verdict
The Hella Auxiliary Indicator suits motorists and fitters who need a compact, compliant side or mirror signalling option. ECE approval, a crystal clear lens and three yellow LEDs combine for visible, road-legal flashing. Although costs vary, the legal approval and simple, durable design make it a practical long-term choice.
