'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
Electronics maintenance spray for targeted PCB flux removal and board cleaning. Cleaner boards reduce repair time and frustration for hobbyists and technicians. Is the Tne PCB Cleaner compact and capable enough for regular workshop use?
⚡ At a Glance
- • Cleaning Power: Targeted flux removal with spray application and brush-assisted scrubbing
- • Best for: Hobbyists and bench technicians carrying out small-scale PCB maintenance
- • Not ideal for: High-volume or industrial cleaning where larger solvent quantities are needed
Spray can contains 100 ml of cleaning fluid with a special brush included. Relative density is 0.79 g/cm³ and viscosity measures 22.8 MPa·s.
Precise spot cleaning - with 100 ml spray and special brush
Spray format delivers a controlled mist for localised application while a dedicated brush allows mechanical agitation on stubborn residues. Box contents list one 100 ml spray can and a special brush for targeted work.
Accurate application prevents over-wetting nearby components and helps remove flux from tight areas. Brush-assisted cleaning makes residue removal quicker on delicate boards.
Good wetting for fine tracks - thanks to low relative density and viscosity
Relative density at 20°C is 0.79 g/cm³ and viscosity is 22.8 MPa·s, indicating a relatively thin fluid that spreads readily. Thin fluids tend to reach between pins and narrow traces more easily than thicker liquids.
Fluid reaches narrow gaps and component leads more effectively, improving contact-cleaning of soldered joints. Reduced surface tension helps tackle residues in dense assemblies.
Toolbox friendly - with compact 100 ml capacity
Compact 100 ml spray can format is designed for portability and small-scale tasks, supplied with a brush for immediate use. Capacity suits occasional maintenance rather than continuous industrial duty.
Small can fits repair kits and workshop shelves without taking much space. Ideal for occasional cleaning jobs and field repairs where larger containers would be impractical.
✨ The 4 Key Reasons for Tne PCB Cleaner
- 100 ml spray can - Precise small-area cleaning without excess solvent for delicate PCB work.
- Special brush included - Targets stubborn flux residues in tight component areas.
- Low viscosity fluid - Reaches narrow traces and component gaps more easily.
- Compact can design - Fits workshop shelves and carries in a repair kit.
📋 Technical Details at a Glance
- Category: Home Improvement
- Brand: Tne
- Product ID: B0C1CCDXVF
- Capacity: 100 ml (spray)
- Form: Spray can
❓ Frequently Asked Questions
Q: Is this suitable for removing solder flux from PCBs?
A: Yes, the product name and description identify the item as a flux remover designed for PCB cleaning.
Q: What comes in the box?
A: One 100 ml spray can and a special brush are included in the box contents.
Q: What are the fluid properties that affect cleaning?
A: Relative density at 20°C is 0.79 g/cm³ and viscosity is 22.8 MPa·s, indicating a relatively thin fluid that wets surfaces readily.
🏆 Our Verdict
Ideal for hobbyists and bench technicians carrying out small-scale PCB maintenance. Compact 100 ml spray with a special brush enables targeted flux removal and quicker repair turnaround. Small can size suits occasional use and delivers practical value for routine workshop upkeep.
