'%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V1H33V33Z'%20fill='white'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M33%2033H1V17H33V33Z'%20fill='%23DC143C'/%3e%3c/g%3e%3crect%20x='0.5'%20y='0.5'%20width='33'%20height='33'%20rx='16.5'%20stroke='black'%20stroke-opacity='0.1'/%3e%3cdefs%3e%3cclipPath%20id='clip0_37449_250459'%3e%3crect%20x='1'%20y='1'%20width='32'%20height='32'%20rx='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
ELEGOO Filament Vacuum Storage Kit is a storage solution for 3D printing spools, designed to keep filament dry and sealed for reliable printing. Keeping filament dry preserves print quality and removes the worry of brittle or damp material between jobs. Will it speed up storage routines and suit a busy hobby workshop?
⚡ At a Glance
- • Airtight Performance: 0.21 mm thickened bags and an upgraded high-efficiency valve maintain a durable seal
- • Best for: Hobbyists and small workshops who need reliable moisture control for common spool sizes
- • Not ideal for: Users who store spools heavier than 1kg or unusually large spool diameters
A kit that combines a 60 KPa automatic pump with 20 vacuum bags and sealed clips. Designed to remove air quickly and keep common filament types like PLA, PETG and TPU dry.
Keep Filament Dry, thanks to the upgraded automatic pump and thickened vacuum bags
A 60 KPa automatic pump works with 0.21 mm thickened bags and a high-efficiency valve to evacuate air. The thicker film and upgraded valve improve overall seal integrity.
Reduced moisture exposure helps preserve filament flexibility and print reliability, especially for materials prone to absorbing water.
Faster Sealing, with an upgraded automatic valve that increases suction speed
The automatic valve improves airflow control, increasing suction speed by around 15% compared with the previous design. Sealing uses the supplied clips to close the bag before evacuation.
Quicker vacuum cycles save time when storing multiple spools and make routine storage practical for frequent printing sessions.
Broad Compatibility, with support for common spool sizes and filament types
Bags measure 35 x 32 cm and are suitable for spools up to 1kg, accommodating filament diameters of 1.75 mm, 2.85 mm and 3 mm. Materials listed include PLA, PETG and TPU.
Works with most hobbyist and prosumer filaments, so a single kit can manage mixed-material collections without separate storage systems.
✨ The 4 Key Reasons for ELEGOO Filament Vacuum Storage Kit
- Upgraded automatic pump - Faster extraction, about 15% quicker suction for quicker sealing
- 20 vacuum bags included - Store multiple spools for batch protection and rotation
- Wide filament compatibility - Accepts 1.75/2.85/3 mm filaments, suitable for PLA, PETG and TPU
- Sealed bag clips included - Secure manual closure for repeatable, reliable vacuum cycles
📋 Technical Details at a Glance
- Product type: Filament vacuum storage kit
- Bag size: 35 x 32 cm
- Bag thickness: 0.21 mm
- Pump suction: 60 KPa automatic pump
- Number of bags: 20
❓ Frequently Asked Questions
Q: Will the kit fit standard 1kg spools?
A: Yes. Bags are suitable for filaments up to 1kg, so most standard hobby spools will fit.
Q: Which filament diameters and materials are supported?
A: Compatible diameters are 1.75 mm, 2.85 mm and 3 mm, and listed materials include PLA, PETG and TPU.
Q: How long will a sealed bag keep filament dry?
A: The upgraded high-efficiency valve and thickened bags maintain airtightness for over 30 days according to the product description.
🏆 Our Verdict
Ideal for hobbyists and small workshops that need dependable moisture control for everyday filaments. The combination of a 60 KPa automatic pump, thicker 0.21 mm bags and an upgraded valve makes reliable vacuum sealing straightforward. While initial investment varies, the kit delivers long-term value by keeping filament usable and reducing waste.
